Fix: Flashing an M1015 – Error code = 64 Failed to flash the image. Please retry recovery
I purchased an IBM M1015 to use as an HBA in my server. As part of that, I wanted to flash it with the IT firmware, however, I was getting errors, even when I used the original IBM firmware from their website:
C:\> megarec -cleanflash 0 M1000FW.ROM MegaRAID HWR Controller Recovery tool. Version 01.01-004 February 05, 2010 Copyright (c) 2006-2008 LSI Corp. Supports 1079 controller and its Successors Erasing Flash Chip (8MB).... Completed: 100% Flashing Image. Please wait... Currently flashing component = BIOS Programming Flash.... Completed: 100% Verifying the Flashed Data... Currently flashing component = HIIM Programming Flash.... Completed: 100% Verifying the Flashed Data... Currently flashing component = APP Error in downloading the image. Error code = 64 Failed to flash the image. Please retry recovery
I’d never seen an M1015 before, at least not close up. Closer inspection of the card, however, revealed a code: FRU 46C8927
. I know FRU” means “Field Replaceable Unit” i.e. something you can order as a replacement part. So I googled that code, and discovered that this was an IBM M5015, not an M1015. The M5015 cannot be used in IT mode, so I had to send it back.